Der neue Raspberry Pi 5 auf Lager ×

Sound Detector

The Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound, and an analog representation of its amplitude. The 3 outputs are simultaneous and independent, so you can use as many or as few as you want at once.

15,58 €
inkl. 20% USt. , zzgl. Versand
Nicht auf Lager
Beschreibung

The Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound, and an analog representation of its amplitude. The 3 outputs are simultaneous and independent, so you can use as many or as few as you want at once.

The envelope output allows you to easily read amplitude of sound by simply measuring the analog voltage. Gain can be adjusted with a through-hole resistor, to change the threshold of the binary (gate) output pin as well. Check the hookup guide below for more information about setting gain.

Each of the three output signals is present on the .1" header at the edge of the board. They are active simultaneously. If you are rsquo;t using one in your particular application, simply leave that pin disconnected.

Documents

Bewertungen

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufentscheidung:

Kunden kauften dazu folgende Artikel:
Screw Terminals 3.5mm Pitch (2-Pin)
42 Auf Lager SKU: SER00006
MQ135 Sensor Air Quality Sensor NH3, NOx, Alcohol, Smoke...
> 50 lagernd SKU: SER00469
Loading ...
kein Bild
Artikelnummer:
ab *
/