Der neue Raspberry Pi 5 auf Lager ×

DC-DC Automatic Step Up-down Power Module (2.5~15V to 3.3V 600mA)

The DC-DC Automatic Step Up-down Power Module (2.5~15V to 3.3V 600mA) contains the function of automatic buck-boost and integrates with the related circuit of buck-boost converter. Its mini body is very easy for embedding.

6,00 €
inkl. 20% USt. , zzgl. Versand
Nicht auf Lager
Beschreibung

The DC-DC Automatic Step Up-down Power Module (2.5~15V to 3.3V 600mA) contains the function of automatic buck-boost and integrates with the related circuit of buck-boost converter. Its mini body is very easy for embedding.

Input voltage range 2.5-15V, fixed output voltage 3.3V, the maximumload current is 0.6A and its quiescent current is as low as 200uA. In theory, the work frequency of the module can reach to 1.2MHz. Besides, it has steady output voltage, which can work long time without voltage shift and is suitable for the occasions with high requirements. You can use this power module to DIY mobile power bank and provide constant power for your project.

Features

  • Small size, stable performance, wide voltage range for a variety of DIY applications

Applications

Power supply for controller main-board, DIY current source, floodlight, DIY toy car, communication device, digital radio.

Serial numberNameDirectionApplication
1Vo+outputOutput positive current source
2Vo-outputGround wire, output port current source reference
3Vi-inputGround wire, link to current source reference
4Vi+inputPower supply input:2.5-15Vdc

Typical Performance Characteristics(Conversion)

Specification

  • Input Voltage: 2.5~15Vdc
  • Output Voltage: 3.3V
  • Output Accuracy: ±0.1V
  • The Maximum Output Peak Current: 600mA
  • Full-load Output Ripple: Vpp<50mV
  • No-load Current: IQ 180uA
  • Switch-off Function: Not Support
  • Operating Temperature: -40? ~ +85?
  • Operating Humidity: 20% ~ 90% relative humidity, no condensation
  • Storage Temperature: -40? ~ +125?
  • Installation Method: Chip-mounting
  • With or Without Isolation: Without Isolation
  • Service Life: 30000h
  • Dimension : 17×13mm/0.67×0.51inch
NOTE
  1. The input voltage must within 15V.
  2. Load current should not be in 600mA or above for a long time, otherwise it will affect the service life of the module and even burn out.
  3. If the load current is relatively high, you should increase the minimum input voltage to ensure normal operation.
Bewertungen

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufentscheidung:

Kunden kauften dazu folgende Artikel:
DC-DC Buck-Mode Power Module (8~28V to 3.3V 3A)
DC-DC Buck-Mode Power Module (8~28V to 3.3V 3A)
13 Auf Lager SKU: DFR00570
Krokodil Klemmen
9 Auf Lager SKU: SER00015
Screw Terminals 3.5mm Pitch (3-Pin)
> 50 lagernd SKU: SER00007
Screw Terminals 3.5mm Pitch (2-Pin)
42 Auf Lager SKU: SER00006
Jumper Wire Male to Male 10 Pin - 20cm
> 50 lagernd SKU: SER00062
Widerstand 470R 5% 0,25W
> 50 lagernd SKU: SER00918
Widerstand 150R 5% 0,25W
> 50 lagernd SKU: RS7077603
P-Channel MOSFET 20V 24A - low Vgs(th) - NDP6020P
P-Channel MOSFET 20V 24A - low Vgs(th) - NDP6020P
Ausverkauft
Nicht auf Lager SKU: SER00144
Capacitive Soil Moisture Analog Sensor
Capacitive Soil Moisture Analog Sensor
Ausverkauft
Nicht auf Lager SKU: SER00846
Vibration Motor
Ausverkauft
Nicht auf Lager SKU: SPR08449
P-Channel MOSFET 60V 27A - FQP27P06
P-Channel MOSFET 60V 27A - FQP27P06
Ausverkauft
Nicht auf Lager SKU: SPC10349
MCP4725 I2C DAC Breakout
MCP4725 I2C DAC Breakout
Ausverkauft
Nicht auf Lager SKU: SER01270
IR Receiver Diode - TSOP38238
Ausverkauft
Nicht auf Lager SKU: RS7085086
Loading ...
kein Bild
Artikelnummer:
ab *
/