Sommer Öffnungszeiten ab 22.07.2024 ist Montag - Freitag von 10:00 - 15:00, Samstag von 10:00 - 12:00 und Sonntag geschlossen ×

SparkFun Servo pHAT for Raspberry Pi

The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I2C connection. Thanks to its I2C capabilities, this PWM HAT saves the Raspberry Pi's GPIO pins, allowing you to use them for other purposes. The Servo pHAT also adds a serial terminal connection, which will allow you to bring up a Raspberry Pi without having to hook it up to a monitor and keyboard. We have provided a Qwiic connector for easy interfacing with the I2C bus using the Qwiic system, and a 4-pin header specifically for connecting to the Sphero RVR.

18,00 €
inkl. 20% USt. , zzgl. Versand
Nicht auf Lager

Beschreibung

Beschreibung

The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I2C connection. Thanks to its I2C capabilities, this PWM HAT saves the Raspberry Pi's GPIO pins, allowing you to use them for other purposes. The Servo pHAT also adds a serial terminal connection, which will allow you to bring up a Raspberry Pi without having to hook it up to a monitor and keyboard. We have provided a Qwiic connector for easy interfacing with the I2C bus using the Qwiic system, and a 4-pin header specifically for connecting to the Sphero RVR.

Power to the SparkFun Servo pHAT can be supplied through USB-C connector. This will power either the servo motors only, or power the servo motors as well as the Raspberry Pi that is connected to the HAT. We switched to USB-C to allow you to bring more current to your servos than ever before. This USB-C connector can also be used to hook up the Pi via serial port connection to avoid having to use a monitor and keyboard for setting up the Pi. To supply power only to the servo power rail (and not the Pi's 5V power rail), you just need to cut a small trace on the isolation jumper. Doing this allows you to drive heavier loads coming from multiple or larger servos. We've even added power protection circuits to the design, to avoid damage to power sources.

Each of this pHAT's 16 servo motor pin headers has been spaced out to the standard 3-pin servo pinout (ground, 5V, signal) to make it easier to attach your servo motors. The Servo pHAT is the same size and form factor as a Raspberry Pi Zero and Zero W, but it can also operate with a regular Raspberry Pi (not yet tested on the Raspberry Pi 4).

Note: This HAT includes headers to connect to a Raspberry Pi, so there is no soldering required to get up and running quickly.

Features

  • 16 PWM channels, controllable over I2C
  • Qwiic connector
  • 4-pin RVR header for connection to Sphero RVR
  • USB-C connector
  • 40-pin GPIO header for connection to Raspberry Pi
  • CH340C USB Serial SOIC16
  • Updated logic level conversion circuitry
  • Power protection circuits

Documents

Bewertungen

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufentscheidung:

Kunden kauften dazu folgende Artikel:
DC Motor Driver Modul - Raspberry Pi Pico
DC Motor Driver Modul - Raspberry Pi Pico
10 auf Lager SKU: WS19764
Adafruit STEMMA Soil Sensor - I2C Capacitive Moisture Sensor
Adafruit STEMMA Soil Sensor - I2C Capacitive Moisture Sensor
16 auf Lager SKU: ADA04026
Servo Motor Pan/Tilt Bracket
22 auf Lager SKU: SER01021
Offizielles Raspberry Pi Zero W Gehäuse
Offizielles Raspberry Pi Zero W Gehäuse
Top bewertet
> 50 lagernd SKU: RPI00001
GPIO Header 2x20 Pin - 3mm Pin
> 50 lagernd SKU: SER00511
Jumper Wire Female to Male 10Pin - 10cm
Jumper Wire Female to Male 10Pin - 10cm
Top bewertet
> 50 lagernd SKU: SER00430
Jumper Wire Female to Female 10Pin - 10cm
Jumper Wire Female to Female 10Pin - 10cm
> 50 lagernd SKU: SER00429
Break Away 2x20 Pin Strip Dual Male Header
30 stück auf Lager SKU: SER00752
SparkFun Thing Plus - Artemis
SparkFun Thing Plus - Artemis
Ausverkauft
Nicht auf Lager SKU: SPW15574
OLED 0.66" Shield for Wemos D1 Mini Board
OLED 0.66" Shield for Wemos D1 Mini Board
Ausverkauft
Nicht auf Lager SKU: SER00804
Break Away 2x20 Pin Strip Dual Male Right Header
Ausverkauft
Nicht auf Lager SKU: SER00753
Loading ...
kein Bild
Artikelnummer:
ab *
/
In den Warenkorb
zum Angebot
}