This is a cute half size breadboard which has 400 tie-points, is great for small projects. it\'s 2.2" x 3.4" (5.5cm x 8.2cm) with a standard double-strip (300pts) in the middle and two power rails (100pts) on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4" (3.5cm) and stick it onto your Raspberry Pi. You...
This 47 x 35mm (1.84 x 1.37") breadboard has 17 rows of tie points, enough for up to two 14 or 16 pin DIP integrated circuits (ICs). The board features an adhesive backing and is White color. Add some color to your next project!
Screw Terminals with 3.5mm pitch 2 pins. Comes in 2 or 3 positions and have
the really cool feature of slide-locking together to form any size you need (4,
5, up to 20 without problems). Rated up to 125V @ 6A. Terminal can accept 30 to
20AWG wire. 3.5mm/138mil pin pitch will not fit\'standard 0.1" perf boards but
this is the most common pitch...
This 47 x 35mm (1.84 x 1.37") breadboard has 17 rows of tie points, enough for up to two 14 or 16 pin DIP integrated circuits (ICs). The board features an adhesive backing and is Green color. Add some color to your next project!
The LM335Z is a very easy-to-use analog temperature sensor. The LM335Z works like a Zener diode with a breakdown voltage proportional to absolute temperature at 10mV/¡K. Hook up a resistor from 5V and GND, and the LM335Z will output an analog voltage of 2.98V (298 Kelvin is 25C or room temperature). The output of the sensor is linear, and when...
A Feather board without ambition is a Feather board without FeatherWings! This is the Latching Mini Relay FeatherWing . It gives you power to control, and control over power. Put simply, you can now turn on and off lamps, fans, solenoids, and other small appliances that run on up to 250VAC or DC power using any Feather board.