Der neue Raspberry Pi 5 auf Lager ×

Mifare NFC RC522 Kit

MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the "table" application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice.

5,00 €
inkl. 20% USt. , zzgl. Versand
Nicht auf Lager
Beschreibung

MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the "table" application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. 14443A compatible transponder signals. The digital part of to handle the ISO14443A frames and error detection. In addition, support rapid CRYPTO1 encryption algorithm, terminology validation products. MFRC522 support series of high-speed non-contact communication, two-way data transmission rate up to 424kbit's. As new members of the 13.56MHz reader card series of highly integrated chip family, MF RC522 MF RC500 MF RC530 There are a lot of similarities, but also have many of the characteristics and differences. Communication between it and the host SPI mode helps to reduce the connection narrow PCB board volume, reduce costs.

The MF522-AN module the the original Philips MFRC522 chip design circuit card reader, easy to use, low cost, and applies to the user equipment development, the reader and the development of advanced applications, the need for the user RF card terminal design/production. This module can be directly loaded into the various reader molds. Utilizes a voltage of 3.3V, through the SPI interface simple few lines directly with any user CPU motherboard connected communication can ensure that the module is stable and reliable work, distance card reader

Feature:

  • Working current :13-26mA/DC 3.3V
  • Idle current :10-13mA/DC 3.3V
  • Sleep current: lt; 80uA
  • Peak current: lt; 30mA
  • Operating Frequency: 13.56MHz
  • Supported card types: S50, S70 Ultralight, Pro, DESFire
  • Product physical characteristics: size: 40mm_60mm
  • Environmental Operating temperature: -20-80 degrees Celsius
  • Environmental Storage Temperature: -40-85 degrees Celsius
  • Relative humidity: relative humidity 5% -95%
  • Module interfaces SPI Parameter
  • Data transfer rate: maximum 10Mbit's

Documents

Bewertungen

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufentscheidung:

Kunden kauften dazu folgende Artikel:
LCD 20x4 i2c Modul
LCD 20x4 i2c Modul
Top bewertet
3 Auf Lager SKU: SER00014
Breadboard 400 Pins - 8.3 x 5.5 cm
Top bewertet
> 50 lagernd SKU: SER00419
Jumper Wire Female to Male 10Pin - 20cm
Top bewertet
> 50 lagernd SKU: SER00063
Raspberry Pi Pico Board
Raspberry Pi Pico Board
> 50 lagernd SKU: RPI00050-004
Raspberry Pi 4 USB-C Netzteil 5.1V 3A 15W - Offiziell...
Raspberry Pi 4 USB-C Netzteil 5.1V 3A 15W - Offiziell...
Top bewertet
> 50 lagernd SKU: RPI00018
Soil Moisture Sensor Set compatible with Arduino
> 50 lagernd SKU: SER00538
1 Pin Dupont Cable Housing
> 50 lagernd SKU: SER00079
Jumper Wire Male to Male 10 Pin - 20cm
> 50 lagernd SKU: SER00062
NodeMCU v2 - ESP8266
NodeMCU v2 - ESP8266
Ausverkauft
Nicht auf Lager SKU: SER00424
NFC RFID Plastikkarte - MIFARE 1K (13.56 MHz)
Ausverkauft
Nicht auf Lager SKU: SER00192
Jumper Wire Female to Female 10Pin - 20cm
Ausverkauft
Nicht auf Lager SKU: SER00110
NFC RFID Sticker Tag - MIFARE 1K (13.56 MHz)
Ausverkauft
Nicht auf Lager SKU: SER00193
BME280 I2C or SPI Temperature Humidity Pressure Sensor
BME280 I2C or SPI Temperature Humidity Pressure Sensor
Ausverkauft
Nicht auf Lager SKU: SER00631
Voltage Regulator - 3.3V #LD1117V33
Ausverkauft
Nicht auf Lager SKU: SPC00526
Loading ...
kein Bild
Artikelnummer:
ab *
/