Der neue Raspberry Pi 5 auf Lager ×

DC-DC Buck-Mode Power Module (8~28V to 5V 3A)

DC-DC Buck-Mode Power Module, with input voltage range 8V~28V and fixed output voltage/current 5V/3A. Its work frequency can reach to 0.5MHz. The module has high conversion rate and small size, easy to embed. Besides, it has steady output voltage, which can work long time without voltage shift and is suitable for the occasions with high requirements.

6,50 €
inkl. 20% USt. , zzgl. Versand
Nicht auf Lager
Beschreibung

DC-DC Buck-Mode Power Module, with input voltage range 8V~28V and fixed output voltage/current 5V/3A. Its work frequency can reach to 0.5MHz. The module has high conversion rate and small size, easy to embed. Besides, it has steady output voltage, which can work long time without voltage shift and is suitable for the occasions with high requirements. This product can work with some high-capacity and high-voltage batteries to DIY some mobile power. It can also be embedded into your project to provide multiple power options.

Features

  • Small size, stable performance, wide voltage range for a variety of DIY applications

Applications

Power supply for controller main-board, DIY current source, floodlight, DIY toy car, communication device, digital radio

Specification

  • Input Voltage: 8~28Vdc
  • Output Voltage: 5V
  • Output Accuracy: ±0.1V
  • The Maximum Output Peak Current: 3A
  • Full-Load Output Ripple: Vpp<50mV
  • No-Load Current: IQ  0.5mA
  • Switch-Off Function: Not Support
  • Operating Temperature: -20? ~ +85?
  • Operating Humidity: 20% ~ 90% relative humidity, no condensation
  • Storage Temperature: -40? ~ +125?
  • Installation Method: Chip-mounting
  • With or Without Isolation: Without Isolation
  • Service Life: 30000h
  • Dimension : 16.5×22mm/0.65×0.87inch
NOTE
  1. The input voltage must within 28V.
  2. Load current should not be in 3A or above for a long time, otherwise it will affect the service life of the module and even burn out.
  3. If the load current is relatively high, you should increase the minimum input voltage to ensure normal operation.
Bewertungen

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufentscheidung:

Kunden kauften dazu folgende Artikel:
Break Away 2x20 Pin Strip Dual Male Header
8 stück Auf Lager SKU: SER00752
Adafruit MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout
5 Auf Lager SKU: ADA03199
MQ135 Sensor Air Quality Sensor NH3, NOx, Alcohol, Smoke...
> 50 lagernd SKU: SER00469
Voltmeter und Ampermeter mit doppelten USB Ausgang
Voltmeter und Ampermeter mit doppelten USB Ausgang
Ausverkauft
Nicht auf Lager SKU: SER00956
Offizielles Raspberry Pi 5V 2,5A Netztei für...
Ausverkauft
Nicht auf Lager SKU: SER00568
Raspberry Pi Zero W
Raspberry Pi Zero W
ab 18,00 € *
Nicht auf Lager SKU: SER00750-OB
Load Cell Amplifier - HX711
Load Cell Amplifier - HX711
Ausverkauft
Nicht auf Lager SKU: SER00704
Energy Harvester Breakout - LTC3588
Energy Harvester Breakout - LTC3588
Ausverkauft
Nicht auf Lager SKU: SPB09946
Soldering Iron Cleaning Sponge
Ausverkauft
Nicht auf Lager SKU: SER00067
MCP9808 High Accuracy I2C Temperature Sensor Breakout Board
MCP9808 High Accuracy I2C Temperature Sensor Breakout Board
Ausverkauft
Nicht auf Lager SKU: ADA01782
Carbon Monoxide Sensor - MQ-7
Ausverkauft
Nicht auf Lager SKU: SER00205
Break Away Male Header - Straight 2mm
Ausverkauft
Nicht auf Lager SKU: SER00184
Heatsink Aluminium Set for Raspberry Pi
Heatsink Aluminium Set for Raspberry Pi
Ausverkauft
Nicht auf Lager SKU: SER90010
Loading ...
kein Bild
Artikelnummer:
ab *
/