This 'full-size' breadboard with 830 tie points is perfect for small and medium projects. it's 2.2" x 7" (5.4cm x 16.5cm) with a standard double-strip (630pts) in the middle and two power rails (200pts) on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4" (3.5cm). You can also "snap" these breadboards together either way to make longer and/or wider breadboards.
2.2" x 7" (5.4cm x 16.50 cm)
85mm(0.38in) thick, including sticky foam on the bottom
This is a cute half size breadboard which has 400 tie-points, is great for small projects. it\'s 2.2" x 3.4" (5.5cm x 8.2cm) with a standard double-strip (300pts) in the middle and two power rails (100pts) on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4" (3.5cm) and stick it onto your Raspberry Pi. You...
The Pi T-Cobbler breaks out all 40 pins from the 40 pin GPIO header onto a solderless breadboard. This mini kit will make prototyping with the Raspberry Pi super easy. Each broken out pin is labeled for easy identification without looking at cheat sheets.
Level shifting chips let you connect 3V and 5V devices together safely. This chip is similar to others in the shop (such as the 74LVC125) except this one is particularly good at converting 3V logic up to 5V . This is in demand especially when connecting some 3V devices such as the Teensy 3 to NeoPixels! Just power the 74AHCT125 with 5V, it...