This is a very common 10nF capacitor. Used on all sorts of applications to decouple ICs from power supplies. 0.1" spaced leads make this a perfect candidate for breadboarding and perf boarding. Rated at 50V.
This is a simple, very common rectifier diode. Often used for reverse voltage protection, the 1N4001 is a staple for many power, DC to DC step up, and breadboard projects. 1N4001 is rated for up to 1A/50V.
The LM335Z is a very easy-to-use analog temperature sensor. The LM335Z works like a Zener diode with a breakdown voltage proportional to absolute temperature at 10mV/¡K. Hook up a resistor from 5V and GND, and the LM335Z will output an analog voltage of 2.98V (298 Kelvin is 25C or room temperature). The output of the sensor is linear, and when...
This is the P2N2222A, an NPN silicon BJT (Bipolar Junction Transistor). This little transistor can help in your project by being used to help drive large loads or amplifying or switching applications. The P2N2222A is specifically rated at 40V and 200mA max
The MQ5 is used in gas leakage detecting equipment in consumer and industry applications,this sensor is suitable for detecting LPG, natural gas, coal gas. Avoid the noise of alcohol, cooking fumes and cigarette smoke. The sensitivity can be adjusted by the potentiometer.
These ESD gloves have coated fingers and palms for added grip. These gloves are made using a lint feww polyester fabric. The palms and fingers have a dotted coating providing a non-slip surface for added grip.
The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP-WROOM-32 WiFi / Bluetooth Classic / BLE Module!
Electrolytic decoupling capacitors 10uF/25V. These capacitors are great transient/surge suppressors. Attach one between the power and ground of your project to ensure smooth power delivery. High quality radial electrolytic capacitors.