Raspberry Pi 5 8GB jetzt auf Lager ×

SMT Breakout PCB for 48-QFN or 48-TQFP

This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 48-QFP pin out with traces going to two rows of 0.1" spaced holes, the other has 48-QFN (7mm body). Solder your chip to either side and you're ready to rock on any solderless breadboard. There's even a THM pad on the opposite side of the QFN body pad so you can fill it with solder for a heat sink and/or connect a wire to it (say when the pad must be grounded).
The PCB is identical and can support either a 7mm square QFP or 7mm square QFN chip. Standard thickness PCBs, with 0.7" spacing between the two rows. The PCBs may come on a supporting strip of PCB, simply snap them off to use!
Note!The Package includes only one PCB!

3,07 €
inkl. 20% USt. , zzgl. Versand
4 auf Lager
Lieferdatum: 28.05.2024 - 31.05.2024 (Österreich - Ausland abweichend)
Beschreibung

This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 48-QFP pin out with traces going to two rows of 0.1" spaced holes, the other has 48-QFN (7mm body). Solder your chip to either side and you're ready to rock on any solderless breadboard. There's even a THM pad on the opposite side of the QFN body pad so you can fill it with solder for a heat sink and/or connect a wire to it (say when the pad must be grounded).

The PCB is identical and can support either a 7mm square QFP or 7mm square QFN chip. Standard thickness PCBs, with 0.7" spacing between the two rows. The PCBs may come on a supporting strip of PCB, simply snap them off to use!

Note!The Package includes only one PCB!

Bewertungen

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufentscheidung:

Kunden kauften dazu folgende Artikel:
SMD Breakout Adapter
SMD Breakout Adapter
3 auf Lager SKU: SER01444
Loading ...
kein Bild
Artikelnummer:
ab *
/
In den Warenkorb
zum Angebot