Description
Description
Dual Gigabit Ethernet Mini-Computer Kit For CM4
Suitable for evaluating The Raspberry Pi CM4 and/ or being Integrated into end products.
Features:
- CM4 socket for all variants of Compute Module 4
- 40-Pin GPIO-Header for implementing several HAT's
- Dual RJ45 Gigabit Ethernet (10/100/1000M compatible):
- ETHERNET 0: CM4 original ETH
- ETHERNET 1: USB extended ETH
- 3x USB 3.2 Gen 1 Ports
- 2x HDMI Port
- CAM Ports: 2x MIPI CSI camera ports
- DC power supply port for 7~36V DC Voltage input
- Dual LED indicators
- RED: Raspberry Pi power indicator
- Green: Raspberry Pi operating indicator
- TF card slot: connecting a TF card with pre-burnt image (Lite variant ONLY)
- FAN Header for integrating cooling fan solution (adjustable)
- DISP0: MIPI DSI display port
- USB SLAVE port (for burning system image into CM 4 eMMC variants)
- RTC battery holder (for CR1220 button cell)
- RTC interruption configuration:
- PI-RUN: CM4 will reboot on RTC interruption
- GN-EN: CM4 powerdown on RTC interruption
- D4: D4 pin is triggered on RTC interruption
- IO-VREF selection for CM4 IO logic level adjustment (1.8v/3.3V9
- FAN power supply selection (5V/12V)
- System function configuration
- BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY
- WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY
- WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or TF card
- RTC/FAN I2C bus selection:
- SDA0/SCL0: I2C-10 is shared with CSI/DSI
- GPIO3/2: I2C-1 is shared with 40-Pin header
- RTL8153
- USB Gigabit Ethernet chip
- EMC2301
- Controller for fan speed adjustment + measurement
- VL805 Chip
- USB 3.0 HUB
Specifications
| CM4 SOCKET | Compatible for all variants of Compute Module 4 |
|---|---|
| ETHERNET | 1 × Dual Gigabit Ethernet RJ45 |
| USB | 3 × USB 3.2 Gen1 |
| PIN HEADER | 1 × 40-Pin GPIO header |
| DSI DISPLAY | 1 × MIPI DSI display port, 15pin 1.0mm FPC connector |
| CSI CAMERA | 2 × MIPI CSI-2 camera port, 15pin 1.0mm FPC connector |
| HDMI | 2 × HDMI, supports 4K 30fps output |
| RTC | Real-time clock with battery socket and ability to wake Compute Module 4 |
| TF CARD SLOT | TF card socket for Compute Module 4 Lite (without eMMC) variants |
| FAN | 5V/12V operable + fan adjustments |
| POWER INPUT | 7V - 36V operable |
| DIMENSIONS | 109.0 × 91.5mm |
Reviews
