Description
The "Raspberry Pi CM4 - Mini Base PC Kit" is a high-quality expansion board for the Raspberry Pi Compute Module 4 from Waveshare. Developers can use it to expand their IoT and embedded system projects and add new functions. The board is robust and space-saving, and offers a wide range of inputs and outputs, including Ethernet, USB, HDMI, GPIOs and serial ports. The device is powered by a 5 VDC power supply and is compatible with Linux and Android.
The platform is easy to install and use, and comes with a USB-to-HDMI adapter for easy connection to an HDMI monitor. Waveshare's website provides detailed technical specifications, dimensions and images to help customers choose the right product. With the "Raspberry Pi CM4 - Mini Base PC Kit", developers can take their Raspberry Pi Compute Module 4 projects to a higher level and improve functionality. In addition, this kit also includes a Raspberry Pi Compute Module 4 with WLAN, 2GB RAM, 16GB Flash (eMMC).
Specifications
- Compute Module 4 SOCKET for all CM4 variants
- Network Port:
- Gigabit Ethernet RJ45 connector (10M/100M/1000M Network support)
- USB-C Port:
- For Power Supply / Programming (5V/2.5A) for eMMC burning
- M.2 M-KEY-Slot for communication modules or NVME Solid State Drives up to Type 2242
- Raspberry Pi 40-Pin GPIO header Connector onboard for easy HAT's integration.
- USB Ports for connecting USB Devices:
- 2 × USB 2.0 Type A
- 2 × USB 2.0 Type A via FFC connector (on the USB/HDMI Adapter).
- MIPI DSI display port (via 15pin 1.0mm FPC connector)
- 2 × HDMI port (including one port via FFC connector), supports 4K 30fps output
- HDMI0 Port: Output: 4K@30fps
- HDMI1 FFC port to connect to USB/HDMI Adapter (Output: 4K@30fps)
- LED Indicator:
- M.2: Status Interface
- ACT: Raspberry Pi Status Interface
- PWR: Raspberry Pi Power Supply
- BOOT Switch
- ON: CM4 would be booted from USB-C interface
- OFF: CM4 would be booted from eMMC or TF card
- RTC-Unit: Unit with CR1220 socket support to enable ability to wake Compute Module 4
- RTC interrupt selection
- PI-RUN: CM4 reboot on RTC interruption
- GN-EN: CM4 shutdown on RTC interruption
- D4: D4 pin is triggered on RTC interruption
- Storage ability with TF card socket for CM4 4 Lite (without eMMC) variants
- Fan Header (5V Input)
- For speed adjustment and measurement
Delivery scope:
- 1 × CM4-IO-BASE-B
- 1 × Metal case (top and bottom)
- 1 × USB-A to USB-C cable 1m
- 1 × USB HDMI Adapter
- 1 × FFC cable 6PIN 1.0 pitch 60mm
- 1 × FFC cable 20PIN 0.5 pitch 60mm
- 1 × Fan-4010-PWM-5V
- 1 × 5V 3A USB-C power adapter
- 1 × Screws pack
- 1 × Screwdriver
It also includes:
- 1 × Raspberry Pi Compute Module 4 with WLAN, 2GB RAM, 16GB Flash (eMMC).
