Description
The Pico SIM7080G Cat-M/NB-IoT is an NB-IoT (NarrowBand-Internet of Things), Cat-M (also known as eMTC, Enhanced Machine Type Communication), and GNSS (Global Navigation Satellite System) module for Raspberry Pi Pico. It supports multiple NB-IoT frequency bands, can be controlled via serial AT commands, and supports communication protocols such as HTTP/MQTT/LWM2M/COAP, etc. Due to the advantages of low latency, low power consumption, low cost, and wide coverage, it is the ideal choice for IoT applications such as smart instruments, asset tracking, remote monitoring, etc.
Features
- Standard Raspberry Pi Pico header, compatible with Raspberry Pi Pico series boards
- UART communication, serial AT command control
- Supports communication protocols: TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT...
- GNSS positioning support: GPS, GLONASS, BeiDou, and Galileo
- Integrated 3.7V LiPo battery connector and charging circuit, allows power supply via an external rechargeable Li-Po battery or charging it in turn
- 2x LED indicators for monitoring module operating status
- Onboard Nano-SIM card slot, supports ONLY 1.8V SIM cards (3V SIM card is not available)
- Comes with development resources and manual (MicroPython examples)
Specifications
- Applicable Region: Global
- NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85
- Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
- GNSS: GPS, GLONASS, BeiDou, Galileo
- NB-IoT (Kbps): 136(DL)/150(UL)
- Cat-M (Kbps): 589(DL)/1119(UL)
- Communication Protocol: TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT...
- Power Supply: External Li-Po battery OR Raspberry Pi Pico USB port
- Battery Interface: 3.7V ~ 4.2V
- Logic Level: 3.3V
- Current
- Idle mode: 10mA
- Sleep mode: 1.2mA
- PSM mode: 3.2uA
- Indicator
- NET: Network indicator
- Charge: Charging indicator
- Switch: Power switch for Li-Po batteries
- SIM card: NB-IoT / Cat-M card (ONLY 1.8V!!)
- Antenna Connector: LTE, GNSS
- Frequency Band
- Data Rate
- Others