Description
This ESP32 4.3 inch IPS display could be an ideal displayer and controller for IoT applications. Its high brightness IPS display with a resolution of 800x480 provides a beautiful display effect, and together with 5 points capacitive touch, it is great for applications such as home automation. The onboard SD card and RTC make it possible to record and play filed data. Additionally, there are 2 Mabee/Grove connectors, allowing users to connect various sensors to this board to create personal prototype projects instantly.
LVGL Demo:
It also supports the LovyanGFX Library.
ESP32 S3 Parallel TFT Comparison: 3.5" VS 4.3"
| Item | 3.5" | 4.3" |
|---|---|---|
| MCU | ESP32 S3 WROOM 1 N16R2 | ESP32 S3 WROOM 1 N16R8 |
| Flash | 16MB | 16MB |
| PSRAM | 2MB | 8MB |
| Dual USB | YES | YES |
| LCD Size | 3.5" | 4.3" |
| LCD Driver | ILI9488 | Unknown, similar to ST7282 |
| Interface | MCU8080 16bit (I80) | RGB565 |
| Resolution | 480x320 | 800x480 |
| Touch Panel Driver | FT6232 | GT911 |
| MicroSD | YES | YES |
| Mabee interface | 1*I2C; 1*GPIO | 1*I2C; 1*GPIO |
| Button | Reset*1; Boot*1 | Reset*1; Boot*1 |
Features:
- Controller: ESP32 S3 WROOM 1, PCB Antenna, 16MB Flash, 8MB PSRAM, ESP32 S3 WROOM 1 N16R8
- Wireless: WiFi & Bluetooth 5.0
- LCD: 4.3 inch High Lightness IPS
- FPS: >30
- Resolution: 800x480
- LCD interface: RGB 565
- Touch Panel: 5 Points Touch, Capacitive
- Touch Panel Driver: GT911
- USB: Dual USB Type C (one for USB to UART and one for native USB)
- USB to UART Chip: CP2104
- Power Supply: USB Type C 5.0V (4.0V~5.25V)
- Button: Flash button and reset button
- Mabee interface: 1*I2C; 1*GPIO
- MicroSD: Yes
- Arduino support: Yes
- Type C Power Delivery: Not Supported
- Operation temperature: 40℃ to +85℃
Use Cases:
Home Automation:
Perfect for creating user friendly interfaces for home automation systems, providing both visual feedback and touch control.
Data Logging and Playback:
With the onboard SD card and RTC, it is ideal for applications requiring data recording and playback, such as environmental monitoring or system diagnostics.
Prototyping with Sensors:
Utilize the Mabee/Grove connectors to quickly prototype and develop sensor based projects, enhancing functionality and interactivity.
