Description
Description
The Luckfox Pico Pro Max is a highly integrated development board that is perfect for demanding applications. With its powerful ARM Cortex-A7 processor and integrated NPU, it offers impressive computing power. The ISP (Image Signal Processor) enables excellent image processing, while the extensive interfaces and GPIO pins facilitate development and integration into various projects.
Specifications
- Processor: Cortex [email protected]
- NPU: 0.5TOPS, supports int4, int8, and int16
- ISP: Input 5M @30fps (Max)
- Memory: Pro: 128MB DDR3L, Max: 256MB DDR3L
- USB: USB 2.0 Host/Device
- Camera: MIPI CSI 2-Lane
- GPIO: 26 × GPIO Pins
- Ethernet Port: 10/100M Ethernet Controller and embedded PHY
- Standard Storage: SPI NAND FLASH (256MB)
Highly Integrated and Powerful
Integrates CPU, NPU, ISP, and other processors:
- Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU
- Built-in Rockchip self-developed 4th generation NPU, offers high computing accuracy and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
- Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
- Offers powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saving more than 50% bitrate of the conventional CBR mode, making the images from the camera high-definition and smaller, doubling the storage space
- Built-in 16-bit DRAM DDR3L, capable of sustaining demanding memory bandwidths
- Integrated with built-in POR, audio codec, and MAC PHY
Board Layout*:
- USB Type-C connector for power supply and programming
- ACT-LED
- BOOT button: Press when powering on to enter download mode
- RESET button
- TF card slot
- RV1106: Vision processor SoC with built-in ARM Cortex-A7 core (RV1106G2 for Pro version, RV1106G3 for Max version)
- RTC battery header: MX1.25 connector for connecting the RTC battery
- CSI camera interface: MIPI CSI 2-Lane
- RJ45 Ethernet port
- USB test pads: TP1: USB_N, TP2: USB_P
- USB detection test pad
- W25N02KV: 256MB SLC NAND FLASH
- GPIO header
*Please refer to the numbered image
Other Luckfox Products
- Luckfox Pico MINI RV1103 Linux Micro Development Board integrates ARM Cortex-A7 RISC-V MCU NPU ISP processors
- LuckFox Pico RV1103 Linux Micro Development Board integrates ARM Cortex-A7 RISC-V MCU NPU ISP processors
- LuckFox Pico Plus RV1103 Linux Micro Development Board integrates ARM Cortex-A7 RISC-V MCU NPU ISP processors with Ethernet port
- SC3336 3MP Camera Module (B), with high sensitivity, high SNR, and low-light performance, compatible with LuckFox Pico series boards
Resources
Wiki: Luckfox Pico Max
Reviews
