Description
Description
A compact Waveshare 1.69inch LCD Display Module with touch functionality for DIY application in confined spaces. The LCD module displays at 262k colours and 240 × 280 resolutiopn. It comes with great example codes for supported boards and microcontroller like Raspberry Pi Pico / 2 / 3 / 4 / 5B, Arduino, etc. Seperate voltage regulator for switching operating and logic voltage if needed* Refer to the product documetation for further information.
Features
- Compact 1.69inch display with 240×280 resolution and 262k colours.
- Dedicated Embedded driver chips for display and touch control functionality.
- Wide support for different microcontroller like the Raspberry Pi Pico / 5, Arduino, etc.
- provides online developement resources and manual for selected boards.
Specifications
- Operating Voltage: 3.3/5V*
- Resolution: 240 × 280px
- Display Driver: ST7789V2
- Display Interface: 4-wire SPI
- Display Panel: IPS
- Display Size: 27.972 × 32.634mm
- Touch Driver: CST816T
- Touch Interface: I2C
- Touch Type: capacitive
- Pixel Size: 0.11655 × 0.11655mm
- Module Size: 33.13 × 41.13mm
*Note: Apply the same operating voltage and logic voltage for proper operation. Refer to the documentation for more information.
SPI and I2C Control interface
- VCC: Power (3.3V / 5V input)
- GND: Ground
- LCD_DIN: SPI MOSI pin
- LCD_CLK: SPI Clock pin
- LCD_CS: LCD Chip Selection, low active
- LCD_DC: LCD Data/Command selection (high for data, low for command)
- LCD_RST: LCD Reset, low active
- LCD_BL: LCD Backlight
- TP_SDA: TP Data pin
- TP_SCL: TP Clock pin
- TP_RST: TP Reset, low active
- TP_IRQ: TP Interrupt pin
Scope of delivery
Documentation
Reviews
