Description
Description
The 1.5inch IPS LCD Display Module with 262k RGB colours for a clear and colourful display effect and a resolution with 240 × 280 Pixels that provides a great entry of compact visualisation for your next DIY project. It also includes development resources examples for the Raspberry Pi, the Arduino or STM32 for facilitating its integration.
Features
- 1.5inch IPS LCD Module with 240×280 resolution, 262K RGB colors. and rounded corners
- SPI interface with support for controller boards like Raspberry Pi/Arduino/STM32/ESP32/RP2040/Jetson series
- Includes development resources (examples for Raspberry Pi/Arduino/STM32/ESP32/RP2040/Jetson series). Consult the documentation page for further Information.
Specification
- Operating Voltage: 3.3V/5V
- Resolution: 240 × 280 pixels
- Communication Interface: 4-wire SPI Bus
- Display Size: 24.77×28.90mm
- Display Panel: IPS
- Pixel Pitch: 0.1032×0.1032mm
- LCD Driver: NV3030B
- Dimensions: 28.5×35.0mm
LCD Pinout
- VCC: Power (3.3V/5V input)
- GND: Ground
- DIN: SPI data input
- CLK: SPI clock input
- CS: Chip selection, low active
- DC: Data/Command selection (high for data, low for command)
- RST: Reset, low active
- BL: Backlight
Documentation
Reviews
