Angebote ×

OpAmp Breakout

This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed. The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer.

8,52 €
incl. 20% VAT , plus shipping costs
Out of stock
Description

This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed. The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer.

Documents

Reviews

Write the first review for this item and help others make a purchase decision!:

Others also bought:
Temperature Sensor - Waterproof (DS18B20) - 1 meter
Temperature Sensor - Waterproof (DS18B20) - 1 meter
In stock
3 in stock SKU: SER00010
Raspberry Pi T-Cobbler GPIO 40 Pin for Breadboard
Raspberry Pi T-Cobbler GPIO 40 Pin for Breadboard
In stock
34 in stock SKU: SER00532
Adafruit Micro Lipo - USB LiIon/LiPoly charger
Adafruit Micro Lipo - USB LiIon/LiPoly charger
Out of stock
Out of stock SKU: ADA01304
Breakout Board for Electret Microphone
Breakout Board for Electret Microphone
Out of stock
Out of stock SKU: SPB12758
Rotary Potentiometer - 10k Ohm, Linear
Rotary Potentiometer - 10k Ohm, Linear
Out of stock
Out of stock SKU: SPC09939
TL431 - Voltage Reference
TL431 - Voltage Reference
Out of stock
Out of stock SKU: SPC11078
Loading ...
kein Bild
id:
from *
/
In den Warenkorb
goto offer