These USB Cable Extension 180cm have a type A male connector on one end that plugs into any computer. The opposing end has a female type A connector allowing a second USB cable to be inserted. This allows as many cables to be daisy chained together as needed. May come in White or Black. Cable color and shape may vary slightly from image as our stock rotates.
If you're still trying to wrap your head around the world of USB cables, why not check out our USB Buying Guide?
This sealed Digital Temperature Sensor DS18B20 1 meter probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.
Especially designed for Raspberry Pi / Android Tablet / Android cell phone / Android mini PC and so on. You don\'t have to unplug the cable when you don\'t need to charge for raspberry Pi / Android Tablet / cellphone etc.
Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with individual pixel control. It has way more resolution than a black and white 128x64 display....
This 47 x 35mm (1.84 x 1.37") breadboard has 17 rows of tie points, enough for up to two 14 or 16 pin DIP integrated circuits (ICs). The board features an adhesive backing and is Transparent color. Add some color to your next project!
This gas sensor module is made using MQ6, a low cost semiconductor sensor which can detect LPG, LNG, iso-butane, propane gases at concentrations from 200 to 10,000ppm. The sensitive material used for this sensor is SnO2, whose conductivity is lower in clean air. it\'s conductivity increases as the concentration of sensing gases increases. It has also some...
it\'s a small breakout board for the ENC28J60 Ethernet chip. Contains all the necessary hardware to implement an Ethernet interface including the isolation transformer and LINK/STATUS and power LEDs. SPI interface makes this one of the easiest 10Base-T ICs yet. it\'s 3.3V with 8KB buffer.
The MQ5 is used in gas leakage detecting equipment in consumer and industry applications,this sensor is suitable for detecting LPG, natural gas, coal gas. Avoid the noise of alcohol, cooking fumes and cigarette smoke. The sensitivity can be adjusted by the potentiometer.
MOSFETs are awesome. They\'re like a switch that you flip electronically! This MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. The board also has sewable pads so you can use it in e-textile projects that need more juice. The MOSFET Power Controller came about because microcontrollers, like...