Angebote ×

Teensy LC

The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access and an I2S digital audio interface! There are also 2 separate interval timers! Also, the Teensy LC can provide system voltage of 3.3V or 5V to other devices at up to 5-20mA.

17,50 €
incl. 20% VAT , plus shipping costs
Out of stock
Description

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy LC (Low Cost) is a 32 bit microcontroller board that provides you with an uncomplicated option for getting started with the Teensy line of products without breaking the bank!

The Teensy LC comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!

The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access and an I2S digital audio interface! There are also 2 separate interval timers! Also, the Teensy LC can provide system voltage of 3.3V or 5V to other devices at up to 5-20mA.

All of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1" grid so you can slap it on a breadboard and get to work! So, what sets the Teensy LC apart from the Teensy 3.1? First off, this version has been streamlined to be as cost effective as possible. Obviously, the LC doesn't share a lot of power that the 3.1 possesses but by no means does it make the LC a Ôweak' board! The Teensy LC is equipped with 8kB RAM, 62kB of flash memory, and 27 Digital I/O pins with 13 high res Analog inputs.

Note: The Teensy LC does not come with a micro-B USB cable, please check the Recommended Products section below for an appropriate one.

Dimensions: 1.4 x 0.7" (~35 x 18 mm)

Features:

  • 32 bit ARM Cortex-M0+ 48 MHz CPU
  • 62kB Flash Memory, 8kB RAM, 1/8(emu)kB EEPROM
  • 13 High Resolution Analog Inputs
  • 27 Digital I/O Pins (NOT 5V Tolerant)
  • 10 PWM outputs
  • 7 Timers for intervals/delays, separate from PWM
  • 3 UARTs (serial ports)
  • SPI, I2C, amp; I2S
  • I2S (for high quality audio interface)
  • 4 Lightweight DMA channels
  • Touch Sensor Inputs

Documents:

Reviews

Write the first review for this item and help others make a purchase decision!:

Others also bought:
Micro USB Kabel 180cm
In stock
> 50 lagernd SKU: SER00739
nRF24l01+ 2.4G Wireless Module - 2 Stück
nRF24l01+ 2.4G Wireless Module - 2 Stück
In stock
> 50 lagernd SKU: SER00140
Raspberry Pi 3 Model A+
Top rated
Raspberry Pi 3 Model A+
33,00 € - 59,00 € *
> 50 lagernd SKU: RPI00010
Offizielles Raspberry Pi 3 ABS Case Red White
Offizielles Raspberry Pi 3 ABS Case Red White
Out of stock
Out of stock SKU: SER00481
PowerBoost 1000 Charger - Rechargeable 5V LiPo USB Boost...
PowerBoost 1000 Charger - Rechargeable 5V LiPo USB Boost...
Out of stock
Out of stock SKU: ADA02465
Teensy 3.2
Teensy 3.2
Out of stock
Teensy 3.2
30,00 € *
Out of stock SKU: SPD13736
Triple Axis Accelerometer and Gyro Breakout - MPU6050
Out of stock
Out of stock SKU: SER00126
DC Barrel Power Jack 2.1 x 5.5mm
Out of stock
Out of stock SKU: SPR00119
Loading ...
kein Bild
id:
from *
/