Description
Electronic brick of relay can be connected to digital I/O port, when the input of S port is low level, relay will be under disconnect state; when the input of S port is high level, relay will be under connect state. It can be connected in series to the LED lights, buzzer or even the loop of a small lamp so as to control the state of the switch.
Specifications
| PCB size | 36.0mm X 24.0mm X 1.6mm |
| Working voltage | 5V DC |
| Operating voltage | 5V DC |
| Compatible interfaces | 2.54 3-pin interface and 4-pin Grove interface(1) |
Note 1: S for digital output port, V and G for voltage at the common collector and ground respectively
Electrical characteristics
| Parameter | Min. | Typical | Max. | Unit |
| Working voltage | 4.5 | 5 | 5.5 | VDC |
| Digital input voltage(VCC=5V) | 0 | - | 5 | V |
| Working current(VCC=5V) | - | 34 | - | mA |
| Maximum Switch current | - | 2 | - | A |
| Maximum Switch AC | - | 120 | - | VAC |
| Maximum Switch DC | - | 24 | - | VDC |
Indicator
Status lamp: For NO and COM ports, when relay is connected, LED lamp will be ON; when relay is disconnected, LED lamp will be off.
Download
Reviews (1)
