Angebote ×

Sensirion SPS30 particulate matter sensor

With this new particulate matter sensor, Sensirion is expanding its range of environmental sensor solutions and opening up new dimensions for indoor and outdoor air quality monitoring applications.

58,00 €
incl. 20% VAT , plus shipping costs
Out of stock
Description

With this new fine dust sensor, Sensirion expands its range of environmental sensor solutions, opening new dimensions for indoor and outdoor air quality monitoring applications.

The SPS30 fine dust sensor (PM) represents a technological breakthrough in optical PM sensors. The measurement principle is based on laser scattering and utilizes Sensirion's innovative pollution-resistant technology. This technology, combined with high-quality and durable components, allows for accurate measurements from the first operation throughout its entire lifespan of more than eight years.

PM2.5 and PM10 refer to categories of fine dust with particle sizes up to 2.5 and 10 micrometers, respectively. Fine dust is among the most hazardous pollutants for the human body. Due to their small size, particles can penetrate deep into the lungs, causing respiratory diseases such as bronchitis or asthma over time and contributing to cardiovascular diseases. With Sensirion's PM2.5 sensor, manufacturers of air quality monitoring devices can offer innovative devices for measuring air quality, helping prevent long-term health damage caused by air pollution.

For detailed information, please consult the datasheet.

Particulate Matter Sensor Specifications
Mass concentration accuracy1

±10 µg/m3 @ 0 to 100 µg/m3

±10 % @ 100 to 1000 µg/m3

Mass concentration range1 to 1000 µg/m3
Mass concentration resolution1 µg/m3
Particle detection size range2Mass concentration: PM1.0, PM2.5, PM4, and PM10
Number concentration: PM0.5, PM1.0, PM2.5, PM4, and PM10
Lower limit of detection0.3 µm
Minimum sampling interval1 sec (continuous mode)
Lifetime> 8 years operating continuously 24h/day
Dimensions40.6 x 40.6 x 12.2 mm3
Operating temperature range-10 to +60 °C
Storage temperature range-40 to +70 °C
Electrical Specifications
InterfaceUART, I2C
Supply voltage4.5 – 5.5 V
Average supply current
@ 1 Hz measurement rate
< 60 mA
Reviews

Write the first review for this item and help others make a purchase decision!:

Others also bought:
Sensirion SCD30 CO2 und RH/T Sensormodule
Out of stock SKU: SER01170
Pi Zero USB-A Adapter for Raspberry Pi Zero
Pi Zero USB-A Adapter for Raspberry Pi Zero
In stock
1 in stock SKU: WS15641
Servo Driver HAT for Raspberry Pi with 16-Channel 12-Bit...
Servo Driver HAT for Raspberry Pi with 16-Channel 12-Bit...
In stock
3 in stock SKU: WS15275
Flex Cable for Raspberry Pi Camera and LCD Display - 60cm
In stock
> 50 lagernd SKU: SER00747
Flex Cable for Raspberry Pi Camera and LCD Display - 30cm
New
> 50 lagernd SKU: SER00745
Efest xSmart 18650 Ladegerät - PowerBank
In stock
3 in stock SKU: SER01342
VEML6070 UV Index Sensor Breakout
VEML6070 UV Index Sensor Breakout
Out of stock
Out of stock SKU: SER00877
Raspberry Pi 4 B 4x 1.5GHz CPU - 4GB DDR4 RAM - BLE5 - WLAN
Raspberry Pi 4 B 4x 1.5GHz CPU - 4GB DDR4 RAM - BLE5 - WLAN
Out of stock
Out of stock SKU: RPI00014
BH1750 Light Intensity Sensor
Out of stock
Out of stock SKU: SER00826
ESP8266 D1 Mini - Wemos compatible
ESP8266 D1 Mini - Wemos compatible
Out of stock
Out of stock SKU: SER00792
Raspberry Pi Zero W - Adapter Set
Out of stock
Out of stock SKU: SER00758
Raspberry Pi Camera Module V2 - 8 MegaPixel
Out of stock
Out of stock SKU: SER00553
GPIO Female Header 2x20 pin - Extra long pins
Out of stock
Out of stock SKU: SER00513
Loading ...
kein Bild
id:
from *
/