PCB Heatbed MK2B Dual Power
SKU SER00434 Hersteller Sonstige
4 auf Lager
24,95 €

Endpreis*, zzgl. Versand

Beschreibung

A central mounting hole on the front side to allow for three point mounting. This is much easier for bed leveling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole. A glass plate is highly recommended to provide a truly flat surface and rigidity

The pads to solder onto have been greatly increased as shown in the picture below. The picture shows the wires prepared for soldering routed through the holes for extra security. This does not remove the need to use proper strain relief.

Specification

  • Dimensions 214mmx 214mm
  • Laminate FR4 1.6+-0.15mm
  • 2 layer, 35µm copper
  • Red Soldermask - both sides
  • White Silkscreen - both sides
  • Power Input: 12Vdc
  • copper plated holes

Information

Frage zum Produkt


Bewertungen (0)

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung

Kunden kauften dazu folgende Produkte