# OLED 128x128 1.5inch Display Module

**SKU:** WS13992
**Brand:** Waveshare
**Price:** 16,00 EUR
**Availability:** in stock
**URL:** https://electronics.semaf.at/OLED-128x128-15inch-Display-Module

## Specifications

| Attribute | Value |
|---|---|
| Weight (kg) | 0.05 |

This OLED 128x128 1.5inch Display Module has 16 gray scale, with embedded controller, communicating via SPI or I2C interface.

## Description

This is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface.

### Features

- 128x128 high resolution
- 16 gray scale, better display effect
- Supports SPI or I2C interface, configured via onboard resistor
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

### Specifications

- Driver: SSD1327
- Interface: SPI / I2C
- Display color: White
- Gray scale: 16
- Resolution: 128x128 (most other competitive products are typically 128x64)
- Viewing angle: >160°
- Operating voltage: 3.3V / 5V
- Dimension: 44.5 x 37 (mm)

### Interface

| SYMBOL | DESCRIPTION |
|---|---|
| VCC | Power (3.3~5V input) |
| GND | Ground |
| DIN | Data input |
| CLK | Clock data input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |

There are two available drive interfaces for this OLED module: 4-wire SPI and I2C:

|  | BS | CS | DC | DIN | CLK |
|---|---|---|---|---|---|
| 4-wire SPI | 0 | Chip select | Data/Command | MOSI | SCK |
| I2C | 1 | NC | I2C address selection | SDA | SCL |

### Development Resources

**Wiki:** [www.waveshare.com/wiki/1.5inch\_OLED\_Module](http://www.waveshare.com/wiki/1.5inch_OLED_Module "1.5inch OLED Module Wiki")