Description
Description
The ESP32-S3 Touch-LCD Dev Board is a low-cost, high-performance MCU board designed by Waveshare in a small size with an nboard 1.28inch LCD display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope) as well as with Wifi & Bluetooth 5 and many more features that creates new opportunities for compact DIY projects.
Specification
- Processor: Xtensa® 32-bit LX7 dual-core processor @ 240MHz main frequency max.
- Connectivity:
- 2.4GHz Wi-Fi (802.11 b/g/n)
- Bluetooth® 5 (LE) with onboard antenna
- Storage: 512KB of SRAM + 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory
- Wired Connection: Type-C connector
- Display: 1.28inch IPS capacitive touch display (circular) @ 240x240 resolution and 65K color
- Onboard sensors: QMI8658 6-axis IMU (3-axis accelerometer + 3-axis gyroscope) for detecting motion gesture
- Onboard 3.7V lithium battery recharge/discharge header and 6 x GPIO pins via SH1.0 connector
- Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
- Integrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functions
Onboard Layout
- ESP32-S3R2: The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 2MB PSRAM
- W25Q128JVSIQ: 16MB NOR-Flash
- CH343P: USB to UART chip
- ME6217C33M5G:800mA output, low dropout, high rejection rate
- ETA6096: high-efficiency Lithium battery recharge manager
- QMI8658: 6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer.
- MX1.25 battery header: MX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging
- USB Type-C connector: supports USB1.1 hosts and slave devices
- RESET button
- BOOT button:Press it before resetting to enter download mode
Scope of delivery
- ESP32-S3 Touch-LCD Dev Board
- SH1.0 12PIN cable
Documentation
Reviews
