# BMP180 Barometric Pressure Sensor

**SKU:** SER00194
**Brand:** Sonstige
**Price:** 3,00 EUR
**Availability:** out of stock
**URL:** https://electronics.semaf.at/BMP180-Barometric-Pressure-Sensor

This is high-precision BMP180 low-power digital barometer breakout board. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. it's based on piezo-resistive technology for high accuracy, ruggedness and long term stability. These come factory-calibrated, with the calibration coefficients already stored in ROM. What makes this sensor great is that it is nearly identical to its former rev, the BMP085!

## Description

This is high-precisio BMP180 low-power digital barometer breakout board. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. it's based on piezo-resistive technology for high accuracy, ruggedness and long term stability. These come factory-calibrated, with the calibration coefficients already stored in ROM. What makes this sensor great is that it is nearly identical to its former rev, the BMP085!

This breadboard-friendly board breaks out every pin to a 5-pin 0.1" pitch header. VCC can be from 1.8V to 3.6V and is I/O lines are 5V tolerant; we typically run it on a clean, regulated 3.3V supply. The analog and digital supplies (VDDD and VDDA) are tied to a single header pin, but are separately decoupled. It connects to a microcontroller via I\_C bus (also known as TWI, or on the Arduino, the Wire library).

**Features:**

- Digital two wire (I\_C, TWI, "Wire") interface
- Wide barometric pressure range
- Flexible supply voltage range (1.8V to 3.6V)
- Ultra-low power consumption
- Low noise measurements
- Factory-calibrated
- Includes temperature sensor
- Low-profile with a small footprint

**Documents:**

- [Datasheet](http://cdn.sparkfun.com/datasheets/Sensors/Pressure/BMP180.pdf) (BMP180)
- [Quickstart Guide](https://learn.sparkfun.com/tutorials/bmp180-barometric-pressure-sensor-hookup-)
- [GitHub](https://github.com/sparkfun/BMP180_Breakout)